Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

This article has been cited by the following article(s):

An effective rule for translating optimal selective laser melting processing parameters from one material to another

Hossein Ghasemi-Tabasi, Jamasp Jhabvala, Eric Boillat, et al.
Additive Manufacturing 36 101496 (2020)
DOI: 10.1016/j.addma.2020.101496
See this article

On the effect of scanning strategies in the selective laser melting process

Jamasp Jhabvala, Eric Boillat, Thibaud Antignac and Rémy Glardon
Virtual and Physical Prototyping 5 (2) 99 (2010)
DOI: 10.1080/17452751003688368
See this article

Optimization of Process Parameters for the Laser Polishing of Hardened Tool Steel

Bastian Meylan, Ivan Calderon and Kilian Wasmer
Materials 15 (21) 7746 (2022)
DOI: 10.3390/ma15217746
See this article

Non-matching mesh gluing by meshless interpolation—an alternative to Lagrange multipliers

Rong Tian and Genki Yagawa
International Journal for Numerical Methods in Engineering 71 (4) 473 (2007)
DOI: 10.1002/nme.1961
See this article

On the use of EBSD analysis to investigate the microstructure of gold samples built by selective laser melting

Jamasp Jhabvala, Eric Boillat and Rémy Glardon
Gold Bulletin 44 (2) 113 (2011)
DOI: 10.1007/s13404-011-0017-6
See this article

A coupling technique for non-matching finite element meshes

Luís A.G. Bitencourt, Osvaldo L. Manzoli, Plínio G.C. Prazeres, Eduardo A. Rodrigues and Túlio N. Bittencourt
Computer Methods in Applied Mechanics and Engineering 290 19 (2015)
DOI: 10.1016/j.cma.2015.02.025
See this article

Polyhedral elements with strain smoothing for coupling hexahedral meshes at arbitrary nonmatching interfaces

Dongwoo Sohn and Seungmin Jin
Computer Methods in Applied Mechanics and Engineering 293 92 (2015)
DOI: 10.1016/j.cma.2015.04.007
See this article

Development of three-dimensional interface elements for coupling of non-matching hexahedral meshes

Hyun-Gyu Kim
Computer Methods in Applied Mechanics and Engineering 197 (45-48) 3870 (2008)
DOI: 10.1016/j.cma.2008.03.023
See this article

3D FE simulation for temperature evolution in the selective laser sintering process

S. Kolossov, E. Boillat, R. Glardon, P. Fischer and M. Locher
International Journal of Machine Tools and Manufacture 44 (2-3) 117 (2004)
DOI: 10.1016/j.ijmachtools.2003.10.019
See this article

Periodic mesh generation and homogenization of inclusion-reinforced composites using an element-carving technique with local mesh refinement

Dongwoo Sohn
Composite Structures 185 65 (2018)
DOI: 10.1016/j.compstruct.2017.10.088
See this article

A Generalized Feed Forward Dynamic Adaptive Mesh Refinement and Derefinement Finite Element Framework for Metal Laser Sintering—Part I: Formulation and Algorithm Development

Nachiket Patil, Deepankar Pal, H. Khalid Rafi, et al.
Journal of Manufacturing Science and Engineering 137 (4) (2015)
DOI: 10.1115/1.4030059
See this article

Finite element and neural network models for process optimization in selective laser sintering

E Boillat, S Kolossov, R Glardon, et al.
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 218 (6) 607 (2004)
DOI: 10.1243/0954405041167121
See this article

On the balancing principle for some problems of Numerical Analysis

Raytcho D. Lazarov, Shuai Lu and Sergei V. Pereverzev
Numerische Mathematik 106 (4) 659 (2007)
DOI: 10.1007/s00211-007-0076-z
See this article

Thermal Modelling and Experimental Validation in the Perspective of Tool Steel Laser Polishing

Bastian Meylan, Alexandre Masserey, Eric Boillat, Ivan Calderon and Kilian Wasmer
Applied Sciences 12 (17) 8409 (2022)
DOI: 10.3390/app12178409
See this article