Finite element methods on non-conforming grids by penalizing the matching constraint
ESAIM: M2AN, 37 2 (2003) 357-372
Published online: 2003-11-15
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Toward Architected Microstructures Using Advanced Laser Beam Shaping in Laser Powder Bed Fusion of Ti‐6Al‐4V
Reza Esmaeilzadeh, Jamasp Jhabvala, Lucas Schlenger, Mathijs van der Meer, Eric Boillat, Cyril Cayron, Amir Mohammad Jamili, Junfeng Xiao and Roland E. LogéAdvanced Functional Materials (2025)
https://doi.org/10.1002/adfm.202420427
Fast and accurate laser powder bed fusion metamodels predicting melt pool dimensions, effective laser absorptivity and lack of fusion defects
Lucas Schlenger, Milad Hamidi Nasab, Giulio Masinelli, Eric Boillat, Jamasp Jhabvala, Toni Ivas, Claire Navarre, Reza Esmaeilzadeh, Jian Yang, Christian Leinenbach, Patrik Hoffmann, Kilian Wasmer and Roland E. LogéJournal of Manufacturing Processes 141 1337 (2025)
https://doi.org/10.1016/j.jmapro.2025.03.006
Avoiding cracks in multi-material printing by combining laser powder bed fusion with metallic foils: Application to Ti6Al4V-AlSi12 structures
A.M. Jamili, J. Jhabvala, S. Van Petegem, D. Weisz-Patrault, E. Boillat, J. Nohava, A. Özsoy, S. Banait, N. Casati and Roland E. LogéAdditive Manufacturing 97 104615 (2025)
https://doi.org/10.1016/j.addma.2024.104615
Thermal Modelling and Experimental Validation in the Perspective of Tool Steel Laser Polishing
Bastian Meylan, Alexandre Masserey, Eric Boillat, Ivan Calderon and Kilian WasmerApplied Sciences 12 (17) 8409 (2022)
https://doi.org/10.3390/app12178409
Optimization of Process Parameters for the Laser Polishing of Hardened Tool Steel
Bastian Meylan, Ivan Calderon and Kilian WasmerMaterials 15 (21) 7746 (2022)
https://doi.org/10.3390/ma15217746
An effective rule for translating optimal selective laser melting processing parameters from one material to another
Hossein Ghasemi-Tabasi, Jamasp Jhabvala, Eric Boillat, Toni Ivas, Rita Drissi-Daoudi and Roland E. LogéAdditive Manufacturing 36 101496 (2020)
https://doi.org/10.1016/j.addma.2020.101496
Periodic mesh generation and homogenization of inclusion-reinforced composites using an element-carving technique with local mesh refinement
Dongwoo SohnComposite Structures 185 65 (2018)
https://doi.org/10.1016/j.compstruct.2017.10.088
Polyhedral elements with strain smoothing for coupling hexahedral meshes at arbitrary nonmatching interfaces
Dongwoo Sohn and Seungmin JinComputer Methods in Applied Mechanics and Engineering 293 92 (2015)
https://doi.org/10.1016/j.cma.2015.04.007
A Generalized Feed Forward Dynamic Adaptive Mesh Refinement and Derefinement Finite Element Framework for Metal Laser Sintering—Part I: Formulation and Algorithm Development
Nachiket Patil, Deepankar Pal, H. Khalid Rafi, et al.Journal of Manufacturing Science and Engineering 137 (4) (2015)
https://doi.org/10.1115/1.4030059
A coupling technique for non-matching finite element meshes
Luís A.G. Bitencourt, Osvaldo L. Manzoli, Plínio G.C. Prazeres, Eduardo A. Rodrigues and Túlio N. BittencourtComputer Methods in Applied Mechanics and Engineering 290 19 (2015)
https://doi.org/10.1016/j.cma.2015.02.025
On the use of EBSD analysis to investigate the microstructure of gold samples built by selective laser melting
Jamasp Jhabvala, Eric Boillat and Rémy GlardonGold Bulletin 44 (2) 113 (2011)
https://doi.org/10.1007/s13404-011-0017-6
On the effect of scanning strategies in the selective laser melting process
Jamasp Jhabvala, Eric Boillat, Thibaud Antignac and Rémy GlardonVirtual and Physical Prototyping 5 (2) 99 (2010)
https://doi.org/10.1080/17452751003688368
Development of three-dimensional interface elements for coupling of non-matching hexahedral meshes
Hyun-Gyu KimComputer Methods in Applied Mechanics and Engineering 197 (45-48) 3870 (2008)
https://doi.org/10.1016/j.cma.2008.03.023
On the balancing principle for some problems of Numerical Analysis
Raytcho D. Lazarov, Shuai Lu and Sergei V. PereverzevNumerische Mathematik 106 (4) 659 (2007)
https://doi.org/10.1007/s00211-007-0076-z
Non‐matching mesh gluing by meshless interpolation—an alternative to Lagrange multipliers
Rong Tian and Genki YagawaInternational Journal for Numerical Methods in Engineering 71 (4) 473 (2007)
https://doi.org/10.1002/nme.1961
Finite element and neural network models for process optimization in selective laser sintering
E Boillat, S Kolossov, R Glardon, M Loher, D Saladin and G LevyProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 218 (6) 607 (2004)
https://doi.org/10.1243/0954405041167121
3D FE simulation for temperature evolution in the selective laser sintering process
S. Kolossov, E. Boillat, R. Glardon, P. Fischer and M. LocherInternational Journal of Machine Tools and Manufacture 44 (2-3) 117 (2004)
https://doi.org/10.1016/j.ijmachtools.2003.10.019